服務熱線電話
400-6188-756
超聲波清洗器的原理及用途
來源:http://www.nyvod.cn/ 時間: 2025-08-09 瀏覽次數: 0
定義:超聲波清洗器是利用超聲波在水中振蕩產生“空化效應”進行清洗的設備。是精密器械清洗最常用的洗凈技術。
Definition: Ultrasonic cleaner is a device that uses ultrasonic waves to oscillate in water and generate a "cavitation effect" for cleaning. It is the most commonly used cleaning technique for precision instruments.
使用范圍:手術器械:如敷料鑷、血管鉗、精細器械等。
Scope of use: Surgical instruments such as dressing forceps, vascular forceps, fine instruments, etc.
超聲波是一種聲波,頻率單位是赫茲(Hz),常用頻率如:骨科器械(20、28、30KHz)普通器械(中頻:40 KHz、45 KHz以上)精密器械(高頻:80 KHz、100 KHz以上)
Ultrasonic waves are a type of sound wave with a frequency unit of Hertz (Hz). Commonly used frequencies include orthopedic instruments (20, 28, 30KHz), ordinary instruments (intermediate frequency: 40 KHz, 45 KHz or above), and precision instruments (high frequency: 80 KHz, 100 KHz or above)
低頻率超聲:超聲頻率越低,空化效應越大,摩擦力就越強,噪聲越大。高頻率超聲:
Low frequency ultrasound: The lower the ultrasound frequency, the greater the cavitation effect, the stronger the friction force, and the louder the noise. High frequency ultrasound:
超聲頻率越高,空化效應越小,摩擦力就越弱,噪聲越小。
The higher the ultrasonic frequency, the smaller the cavitation effect, the weaker the friction force, and the lower the noise.
超聲波三頻率轉換清洗時間設定
Ultrasonic three frequency conversion cleaning time setting
如清洗普通器械:清洗時間設定10分鐘(如止血鉗、鈦夾鉗等)
For cleaning ordinary instruments: set the cleaning time to 10 minutes (such as hemostatic forceps, titanium clamps, etc.)
三種超聲頻率轉換:45KHz為8分鐘,48秒轉換一次,10次為8分鐘。80KHz為1分鐘,6秒轉換一次,10次為1分鐘。100KHz為1分鐘,6秒轉換一次,10次為一分鐘。
Three types of ultrasound frequency conversion: 45KHz for 8 minutes, conversion once every 48 seconds, and 10 times for 8 minutes. 80KHz is 1 minute, converted every 6 seconds, and 10 times is 1 minute. 100KHz is 1 minute, converted every 6 seconds, and 10 times is 1 minute.
超聲波清洗器的優點清洗速度快、效率高清洗均勻性好可清洗盲孔、管腔類器械
The advantages of ultrasonic cleaner are fast cleaning speed, high efficiency, good cleaning uniformity, and the ability to clean blind holes and luminal instruments
超聲波清洗器的缺點
Disadvantages of ultrasonic cleaner
破壞性清洗,對器械表面有損傷無流動性,需要其他清洗方式輔助
Destructive cleaning, causing damage to the surface of the instrument without fluidity, requiring other cleaning methods to assist
本文由 超聲波清洗機 友情奉獻.更多有關的知識請點擊 http://www.nyvod.cn/ 真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.
This article is a friendly contribution from an ultrasonic cleaning machine For more related knowledge, please click http://www.nyvod.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.
相關產品
相關文章
-
別誤解工業清洗!通過式清洗機:專啃工業重油污,不是設備無用是認知不足 2026-03-27
-
五金汽配老板必看!單工位旋轉噴淋清洗機,效率翻3倍,工人減負好留人 2026-03-26
-
碳?xì)淝逑礄C:精密件無殘污,全自動升降拋動,環保耐用還省本 2026-03-26
-
單工位旋轉噴淋清洗機:定制級厚材做工,重污凈洗不晃不變形,耐用十年 2026-03-25
-
碳?xì)淝逑礄C:孔隙精密件凈洗神器,油污速溶無殘留,告別水基清洗短板 2026-03-25
-
超聲波清洗越洗越臟?別省換水成本,水質才是潔凈核心 2026-03-24
-
機械零件清洗卡脖子?通過式噴淋清洗機,縫隙油污全剝離,產能翻倍 2026-03-24
-
超聲波清洗機不是萬能款!分清品類、選對用法,才是真高效 2026-03-23
-
發動機大修必看:超聲波清洗機,洗出原廠潔凈,拒絕殘留返工 2026-03-23
-
全自動高壓去毛刺清洗機:機油泵體專屬,一鍵啟動實現全流程自動清洗 2026-03-13

新聞中心




公司動態







魯公網安備37011202000628號